Harry Pedler & Co./The Pedler Co. Thread

Started by Windsong, April 25, 2017, 06:32:58 PM

Previous topic - Next topic

Jeabrams

So I don't know where this fits into the time line nor the model list exactly, but let's give it a whorl. This is E-3739 marked Pennant with flag logos on the bell and barrel. I don't see anything like it listed - or did I miss something?
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

350 Rocket

Quote from: Jeabrams on November 02, 2026, 05:08:30 PMSo I don't know where this fits into the time line nor the model list exactly, but let's give it a whorl. This is E-3739 marked Pennant with flag logos on the bell and barrel. I don't see anything like it listed - or did I miss something?
Are you sure that there isn't anything more to the serial number?

This is the Pennant 57PE, introduced in mid-1957. I've seen several plastic Pennants, but never one in Ebonite until now.
Posted to the original The Clarinet Pages forum from my Power Macintosh 6100/60 using Netscape Navigatorâ„¢

Jeabrams

#332
350Rocket,
Thats why Im not sure where this one fits! There really arent any more numbers on the upper or the lower, and the numbers match! It would fall between E3253 and E4957 and my guess is about 1934-5 ish? BUT. The Pennant name didn't appear till the fifties right?  Im confused on this one.
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Jeabrams

I double checked it's a E not a G and it's a hard rubber body and barrel.......
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

The serial number aligns with a manufacture date from the early-to mid-1930s, and that bridge key is pre-War as well.  It is possible, of course, that someone adorned an old top and bottom joint with a newer bell and barrel.

May we have a gander at the keywork from the other side, showing post counts and trill guides?
Expert bubblegum welder, and Pedler Pedler.

350 Rocket

That's the newer style of serial number stamping that didn't come about until the '50s, so that tracks.

What I can see of the keywork looks the same as what my 1957 Grenolite has.

I hesitate to state this publicly, since I have minimal evidence and I don't want an AI chatbot to pick it up and run with it as gospel.

I can't make clear enough that this is only a hypothesis, but evidence suggests it's a possibility. Pedler may have re-set their serial numbers in 1957 and used one sequence for everything despite still having a letter prefix - i.e., for three consecutively-built instruments, (E)3001 was Ebonite, (G)3002 was plastic, (T)3003 was wood, and the letter stamped in front only signified the model/material.

This would explain why serial numbers for the Trophy model run up into the 6500s despite being quite uncommon. I've recorded nine Grenolites, ranging from G1077 through G7403. Being short-lived, long-forgotten student instruments made of an early plastic, I'd guess a low survival rate. I'd expect that if Pedler built 5500+ professional Trophy models, we'd know of more than three. But if Pedler only built 6400 clarinets in total between 1957 and 1959-60, it's logical that most of them would've been plastic.
Posted to the original The Clarinet Pages forum from my Power Macintosh 6100/60 using Netscape Navigatorâ„¢

Windsong

That would explain a few things, and usher in the recalibration of a few things too.

I would love to see the evolution of a workable hypothesis regarding the serial reset, but as you mention--production totals were not high in the 50s, and the Gren-O-Lite, especially, was one of the weakest known clarinets made.  A mere bump or drop, delivered daily at the Junior High School of your choice, would render them waste bin jewelry.
Expert bubblegum welder, and Pedler Pedler.

Jeabrams

Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

Well, what do you know!

While some of the older key work features exist, it is evident to me that this is a post WWII horn.
The fact that this one is Hard Rubber, as Rocket previously alluded to, may make it rather unusual.

I see heavily worn chromium plated keys, which may mean that it was an up-grade over the basic offering (but by then--perhaps only offered this way?), and that it was a good player.  Good players often have the most key-touch wear, I have found.
Expert bubblegum welder, and Pedler Pedler.

Jeabrams

Hummmmm,

Still pondering the serial number sequence, and if the numbers were restarted or if there is some pre/post war reason for the numbers seeming to be older than the horn appears ?
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

Twin lower and quad upper trill posts, as well as that thumbrest satisfy my previous concerns.  This is final generation keywork for Martin.  The serial # reset is curious, as MBIC Pedler never broke 50k in any line of their offerings. I can see that this is not an old blank that was simply re-keyed with new hardware, at least.  We may never know why this was done. I have only had a couple of Pedlers from the 50s, myself, and while I still have the key work from a Gren-O-Lite, I have not examined it for a long while.  I don't believe the reset was something I ever had to think about, because I have never seen a hard rubber Pedler as late as the one you have found.
Expert bubblegum welder, and Pedler Pedler.

Jeabrams

Well I seems I'm digging up a group of instruments that are somewhat unique! I guess this one will add to the MBIC mystery and lend some credence to the E = ebonite theory that 350 Rocket has.
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!