Unicorn?

Started by Jeabrams, October 08, 2026, 09:00:29 PM

Previous topic - Next topic

Jeabrams

So this just appeared in my mailbox and I'm wondering if it is really what I think...... see photos below.....

Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

ghostler

Quote from: Jeabrams on October 08, 2026, 09:00:29 PMSo this just appeared in my mailbox and I'm wondering if it is really what I think it cut. United Wellbhummmm à
Photos didn't come through.
Clarinetist and Saxist
Clovis NM Community Band member
https://cloviscommunityband.com/

Jeabrams

#2
Well it seems the mobil app won't let me post photos!  so here I go again!!
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Jeabrams

#3
so here's a couple more for scale and clarity.......

The other two instruments on the stand are an Artley 16-0 piccolo and an Eb clarinet...
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

ghostler

Smaller than an Eb sopranino, it's a Bb sopranino clarinet?
Clarinetist and Saxist
Clovis NM Community Band member
https://cloviscommunityband.com/

Jeabrams

#5
Ab sopranino Buffet ,Albert  System keywork.
My guess is mid to late 1800's...... with an original hand carved mouthpiece and original(?) ligature. I have replaced the lower set of pads and it's almost playable. I need to find 5mm pads or make some for the upper keys..... I've also made a 3D replica mouthpiece just because I think the original needs to be set aside as a working example. 
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

Jeabrams,

That is super cool.  I trip over my fingers playing my Eb and D natural, so I cannot fathom the hands needed to play this one quickly.  The body appears to be rosewood.  And is that an Italian maker's inscription on the upper joint just under the Buffet logo? 

That is a proper standard Albert right there.  2 rings is perfect.  Literally all you need, save for a decent F#, but that is how it is with most Alberts. 

Congrats!

(Please let me know if you would like to make me a 3D Key of D mouthpiece for my one and only wooden one. I will pay gladly.)

Expert bubblegum welder, and Pedler Pedler.

ghostler

Interesting, an Ab sopranino in Albert system, Jeabrams. That indeed is a rare find and in such good condition.

I don't have any Albert system clarinets yet. Maybe one of these days ....
Clarinetist and Saxist
Clovis NM Community Band member
https://cloviscommunityband.com/

Jeabrams

Windsong pm me the inside outside and height measurements for the mouthpiece you need.

 I can scale the one I have and get close I think. There are other dimensions that are much harder to measure without tools but I can make some good guesses about reed hight etc.
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

Quote from: Jeabrams on October 10, 2026, 06:58:09 AMWindsong pm me the inside outside and height measurements for the mouthpiece you need.

 I can scale the one I have and get close I think. There are other dimensions that are much harder to measure without tools but I can make some good guesses about reed hight etc.

Will do, and thank you for being willing to take a look.  Despite the D natural being proportionately longer than Eb, as an A is to a Bb, the D uses a miniscule mouthpiece not even remotely adjacent to the modern or historical Eb mouthpiece--both in terms of length, width, table dimensions and internal bore. I must cut down Eb reeds to allow them to work.

So as not to derail this thread, I will be starting a new MP thread.
Expert bubblegum welder, and Pedler Pedler.

Windsong

Since I have never even held one of these, since they are so rare, I am very interested to hear your report on how it plays once you are able to finish adjustments.
Expert bubblegum welder, and Pedler Pedler.

Jeabrams

#11
I have unfortunately found a snag....

Pads! the smallest I can buy are 6mm - unfortunately I need 4.5s for 5's or a few keys.
This means I get to experiment a bit with corks and with leather punching tools.
I will get there but for the moment the restoration project has slowed up a great bit!

I have re-padded the lower and even with who knows how old upper pads it is sweet! I've tweaked and cajoled it into "playable" but it is not 100% by a stretch - still an amazingly "violin like" clarity! Like the Eb's, sometimes it can be a little "buzzy" if you let up too much
The altissimo is very altissimo!

Ive got to get a set of pads for my oboe sometime soon - I might order two sets just to see if some of them fit. I also ordered some 6mm pads that if I hold my tongue just right I might get to stick.
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!

Windsong

4.5 is small, indeed.  I have run into this issue with tone regulating pads on some 7-ring models, and yes--I typically stamp them from cork, so I agree with your approach.  Necessity is the mother of invention. How about piccolo pads? The yellow ones?  I have found some of those down to at least 6mm.

It is great that you have it playing though, and I can only imagine you could break glass or repel dogs in the altissimo!

I assume it is 454HZ or somesuch?
Expert bubblegum welder, and Pedler Pedler.

Jeabrams

Honestly haven't checked - you have peaked my curosity and i must get out the tuner and see where it is. !!!!
Information technology Retiree - professional band instrument tech, artist, musician, and generally busy with stuff!