Author Topic: Review of the W.Schreiber 6010s  (Read 3685 times)

Offline Skyfacer

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Review of the W.Schreiber 6010s
« on: September 10, 2012, 10:23:49 AM »
REVIEW  Schreiber 6010s Bb Clarinet.(17 Keys / 6 Rings)
   Recently got my new Schreiber 6010s Clarinet from Sax & Woodwind of  Camperdown NSW in 2010. The cost of this instrument was $Aus595.($US522) and it will be used as another of my \'knock-about instruments for outdoor use ect. It was ready to play, straight out of the case, no adjustments required. The serial # is 411426 and is entirely  made in Germany. It is apparently a German made (Buffet) B12 with certain German features such as a wrap-around speaker key and possibly some sort of German bore.
    
   The  thing that I notice when first handling the instrument in it\'s case is the weight of it. At first I thought that the case was empty, but it turns out that this clarinet is a light-weight instrument, weighing in at only 690g fully assembled (minus ligature and reed) This Clarinet is a plastic (ABS Resin) instrument with a semi-matt finish giving it the appearance of ebony and it has silver plated key work . Silver plating on a plastic instrument !  Must be a European thing. Anyway the information states that the 6010 has Nickel Silver key work and Silver plating. The mechanism is of the lighter type that could be described as \'elegant\'. No chunky key work here. I have already did a weeks playing on it and the key work is strong. But then I don\'t use heavy handed fingering. It has a wrap around speaker key which is an old idea. Looks rather \'sexy\' . I have noticed that the resonate tube is about half a centimetre lower down the pipe than the other standard type and the bore intrusion is only about 2.5 mm. It is stated that there is improved intonation because of the special positioning of the register tube. This Clarinet does seem to play very well in tune across it\'s entire compass and goes to show that there has been considerable improvement in the making of plastic Clarinets in recent times. My own testing of the intonation is to play along with orchestral backing CDs. I have no trouble playing in tune with this instrument and no need to do any serious adjusting to play in tune, but I suspect that as this is a basic beginners Clarinet the intonation would be \'set\'. A nice safe\' Clarinet for beginners . It has a 15mm bore . It comes with one barrel (65mm) and is said to be tuned to A442. The usual student mouthpiece is supplied, a moulded plastic ESM.
 
    One thing I have noticed however is that the lower joint flares suddenly about one centimetre just before the bell. It appears that the makers have done some sort of a German type bore. However, the bell has a very small (less than 1mm) flange and this results in the  lower joint not matching up with the bell. When assembled and looking  into the bell you can see a \'step-down of about 1 mm. This doesn\'t seem to have any effect on the intonation
 
   Back to the key work , one nice feature that I have noticed is that the right-hand  E/B key is extended about 5mm further than the other keys of the right-hand \'pinkie\' keys. I think this feature should be on all Clarinets. The \'crow\'s foot\' is a bit on the thin side but has a nice layer of felt on it  (for quietness) which adds to it\'s strength. As for the rest of the key work, as I mentioned before , it is elegantly made with nice roundish (spoon like) keys. No skimping of metal underneath either. It has a  nicely made thumb rest with 4 adjustment positions. I assume that the elongated set screw is also for hooking on a neck strap for use by young players if necessary. This thumb-rest has no cork on it though but is nicely sculpted for the thumb.
 
   There is one feature that is a disappointment however in that this Clarinet has inherited that unfortunate  Buffet idea of using nylon pins for the left-hand E/B and F#/C# keys. Anyone who \'bangs\' down on these keys is going to find later on that they may very well shear off , and then it\'s a major repair job , perhaps to replace them with metal pins and gold-beaters skin. They are being used to give \'quietness\' to the action  and it must be said that all the mechanism has a nice quiet action to it.  The pads are of the double fish-skin type and seem to seal very well.

   All up , this is an excellent Clarinet for beginners to start on , light weight with nicely sculpted ergonomic key work and  the price will suit those on a tight budget but still want to have a well made Clarinet which is in tune with itself.
 
   But Ebonite or wood it ain\'t . I have a lot of fun with these fantastic plastic Clarinets , in  that I try to  improve on the tonal quality of them. Not that a plastic Clarinet doesn\'t have a nice sound , they do , but it\'s kinda on the bright (lighter) side of things. How to get a \'darker\' sound out of them and perhaps more projection as well ? Well, by matching these plastic Clarinets up with a higher quality mouthpiece and  a better quality barrel , the results can be very interesting. I\'m using a Vandoran B40 Lyra with one of Tom Ridenours fat Ebonite barrels on both this Clarinet and also the Jupiter 631 and I end up with a Clarinet that has a full bodied, lovely \'round\' sound , good enough for most of the jobs that I do , such as weddings, quite often outdoors in all kinds of weather, and the usual play outs at retirement villages ect.
 
    Welcome to the modern world of  quality non wooden Clarinets.
« Last Edit: September 11, 2012, 03:49:46 AM by Skyfacer »
The Clarinet is not a Horn.
Barry Vincent

Offline philpedler

  • owner of this site
  • Administrator
  • Sr. Member
  • *****
  • Posts: 489
    • View Profile
    • ClarinetPages
RE: Review of the W.Schreiber 6010s
« Reply #1 on: September 10, 2012, 08:12:50 PM »
Barry!
Thanks for two wonderful reviews!

Is the plastic of the Schreiber lighter than the newer-model Buffet B12? Or about the same are the lighter Chinese clarinets.

Your description of the thumb rest makes me wonder if this isn\'t actually made in China, even with the Schreiber name.

And I agree that using a hard rubber barrel and good mouthpiece will improve the sound so that there is hardly any perceived difference between plastic and wood instruments.

Offline Skyfacer

  • Full Member
  • ***
  • Posts: 201
    • View Profile
RE: Review of the W.Schreiber 6010s
« Reply #2 on: September 10, 2012, 11:32:06 PM »
Hi again Phil. I\'m not sure why this Clarinet is lighter than say the Jupiter plastic instrument. The pamphlet that came with this instrument states the the \"Body is made of ABS resin, with the look of wood, reduced weight, durable , easy to clean , crack resistant , perfect for young players\"
 
One thing though , the wrap around speaker mechanism would easily be bent out of alinement if the instrument was carelessly put together. That is to say, while putting the barrel on. Care must be taken whilst doing this by not making contact with the wrap around speaker key.
 
Just checking up on the possibility that this Clarinet is made in China, I\'ve had another look at the literature that came with the instrument and it categorically states that it is entirely made in Germany. It is one of three models that W. Schreiber make (made) in this range. The other two are made of Granadilla. They are the 6025 and the 6026 (with LH Eb key)

Now to be noted. Schreiber-Keilworth (the full company name) filed for insolvency (Bankruptcy) on the 5th March 2010 so the three models listed above may no longer be in production.
« Last Edit: September 11, 2012, 03:47:13 AM by Skyfacer »
The Clarinet is not a Horn.
Barry Vincent

Offline DaveLeBlanc

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
  • Clarinet-ing since 2012
    • View Profile
    • Watson Musical
RE: Review of the W.Schreiber 6010s
« Reply #3 on: September 13, 2012, 04:55:12 PM »
The description of the thumb rest with the four adjustment positions sounds just like my Buffet B12
David Watson of the original The Clarinet Pages